See more How to Make Halloween Costumes videos: http://www.howcast.com/videos/262700-How-to-Make-a-Werewolf-Costume-Part-1
Do not wait on a moon to release your inner monster. Get your grumble on with these pointers on developing the supreme monster mask.
Action 1: Make the cast
Oil your confront with a generous quantity of petroleum jelly or cream, and safeguard your hair with a wig cap. Utilizing gauze that’s been taken in plaster, make a cast of the leading half of your face from simply above your hairline to the suggestion of your nose, bewaring to prevent your eyes. Build the sides of the mask from your temples to your cheeks. Let it dry.
Action 2: Make a cast of your chin
Make a cast of your chin and jaw from the bottom of one ear to the other and extending an inch under the chin.
Action 3: Produce the headband
Hot glue strips of craft foam to the within the mask on the head and forehead. Stitch the flexible into a band that repairs around your head horizontally. Stitch another piece vertically from the center of your forehead, to the back of your head. Hot glue the flexible to the mask making certain not to cover the eyeholes.
Step 4: Frame the snout
Frame the snout Bend a piece of wire into a narrow U-shape, leaving a couple of additional inches at the ends. Usage epoxy glue to attach completions of the wire to the beyond the cheeks so the wire snout juts out under the nose of the cast.
Step 5: Shape the snout.
Hot glue a block of foam to the top of the wire ranging from the suggestion of the snout to the plaster mask. Usage scissors to cut the foam into a rough snout. Bend a 2nd piece of wire into a U, leaving 7 inches of additional wire at each end. Epoxy it to the beyond the chin cast so that the additional wire continues numerous inches past the plaster.
Action 6: Produce the jaw
Glue foam to the underside of the wire connected to the chin cast and cut it into a rough jaw
Action 7: Connect the jaw.
Bend the additional wire with pliers, and epoxy the wire pieces from the chin to either side of the face so the jaw connects to the face-mask and compares with the snout. Then, shape a more refined snout over the foam with paper clay, mixing it into the plaster face. Shape over the jaw with paper clay and let it dry.
Step 8: Frame and shape the ears
Produce 2 wire frames for the ears and epoxy them to the top of the head. Wrap plaster gauze around the ear frames to form rough ears. Let the plaster dry, and after that shape paper clay around the plaster and wire to improve the ears.
Step 9: Use ending up touches
Utilize the paper clay to shape information like nostrils, a mad eyebrow, a lip line, and a tongue.
Action 10: Produce teeth
Utilizing little pieces of white polymer clay, develop teeth and fangs for the upper and lower jaw. Line up teeth and surround each group with a thin strip of red polymer clay to develop gums. Bake the polymer clay according to the plan instructions. Then, glue the teeth into location.
Action 11: Prime and paint
Prime or seal the mask inside and out. Paint the face and ears the color of your fur, and the tongue red. Then, complete the teeth and nose with a shiny clear coat.
Action 12: Eliminate the fur
Cut strips of phony fur to match the shapes of the mask.
To cut the phony fur, location it facedown on a difficult surface area and utilize an energy knife.
Step 13: Connect the fur
Hot glue the fur into location. It needs to hang simply past the bottom of your neck. Cut so that it’s much shorter in the front and mixes into longer hair in the back. The head’s total! Now see “How to Make A Monster Outfit: Part 2” to complete the appearance.
Did You Know?
Halloween produces almost $6 billion in U.S. sales ever year.